Product Description
silicone heater
real manufacturer for silicone heater
fast delivery
high safety
OEM or ODM is welcomed
any shap is available
silicone heater
silicone rubber heater
silicone flexible heater
silicone heater pad
silicone heater mat
silicone heater panel
silicone heater sheet
silicone heater blanket
1. Electric heating elements,
2. Fast heating,high thermal efficiency
3. long lifetime,
4. Material: Silicon rubber
Introduction silicone rubber heater:
silicone rubber heater heater is a kind of thin film which heats
upon electrified, in a standard thickness of 1.5mm, Adopting nickel
chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to
some certain shapes, the heating component is wrapped with heat
conducting and insulating materials on both sides, and completed in
high-temperature die forming and aging heat treatment. Due to its
high reliability, the product is highly competitive when comparing
with other electric heating film products which normally have paste
materials such as graphite paste or resistor paste, etc. coated on
insulation materials. As a kind of soft red film which can be
applied closely on different curved surfaces, the silastic heater
can be fabricated in varies shapes and powers.
Our company designs, develops and manufactures silicone rubber
heaters, technically eliminating the traditional "hard" defect, and
they can be easily close to the heated object, and their shapes can
be changed upon requests, providing a small temperature difference
and efficient uniform heating surface. The products are widely used
inhealth care, instrumentation, mechanical equipment, monitoring
equipment and tubular and planar heat insulation.
Characteristics of silicone rubber heater:
1. Fast heating with a coefficient of heat conductivity of only
1W/m.k. Due to its small thermal capacity, prompt turn on/off can
be achieved.
2. High thermal efficiency: The temperature of electric heating
film itself is only tens of centidegrees higher than that of the
liquid when heating, which is 2-3 times energy saving than ordinary
electric stoves.
3. Water, acid and alkali resistance, high-strength of electric
insulation.
4. High mechanical strength with 100kg/cm mechanical pressure.
5. Small size: Small space occupied when applying this heating
product.
6. Easy application: Its self-insulation and free-of-open-fire
property greatly help simplify the techniques of heat preservation
and thermal insulation.
7. Its wide range of temperature,-60°C~250°C, can not be simply
achieved by other electrical appliances.
8. Long service time: Under normal use, the product almost can be
permanently and continuously used because nickel and chrome
materials are durable to any corrosion, and the silastic has a high
surface resistance up to 100kg/cm, which is uncomparable for any
other electric heaters.
9. Made in any size, the temperature of the product can be
precisely adjusted by temperature controller. Technical parameters
of silastic heaters:
Stangard
High Temperature
Continuous temperature
150.00°C
250.00°C
The maximun temperature
250.00°C
280.00°C
Dimensions
Maximum
500.00mmx5000.00mm
Minimum
25.00mmx25.00mm
Thickness
1.50mm
Wire length
Stangard 200.00mm
Silicone Rubber Heaters Technical Data:
1. Temperature range: -40.00~250.00°C
2. Electric resistance precision10%( bigger value selected)
3. Power density: 0.10~1.50w/cm
4. Mechanical pressure: 100.00kg/cm
5. Minimum bending radius: 3.20mm
Application of silicone rubber heater:
1. Industrial equipment, pipelines, barrels, tanks, etc.2. Outdoors
telecommunication equipment
3. Medical equipment and devices4. Outdoors electronic devices
5.Thermal imaging of imaging equipment
6. Case protection under cold and moist environment7. Industrial
ovens and thermal processing equipment
8. Ventilator supports9. Laminating equipment 10. Vessels
Silicone rubber heater features:
1) Precise even heating
2) Temperature range of -60°C to 220°C continuously
3) Easily bonded and/or mechanically mounted to heat sink
4) Optional self adhesive backing (PSA) and available for thermal
insulation backing
5) Available with either etched foil or wire elements
6) Minimum thickness of 0.5mm
7) Voltage: from 2 to 600V with either AC or DC voltage sources
8) Watt density: max. 10W/cm
silicone heater Applications:
1) Thermal developing in graphic imaging equipment;
2) Prevent condensation in motors or instrument cabinets;
3) Freeze or condensation prevention in housings containing
electronic equipment,
for examples: traffic signal boxes, automatic teller machines,
